Finishing Touches

The detail that separates finished from almost.

Corners, seams and raw edges are where a DIY wall gives itself away. Matte black aluminum profiles for LOFT, solid wood in matching tones for TERRA — so the join disappears instead of announcing itself.

Aluminum 3 profiles for LOFT
Solid wood 13 tones for TERRA
2 per box Short or long formats
Peel & stick Same install as the panel

For LOFT panels

Aluminum profiles

Textured black, matte. They stick on like the panel does, and they solve the three places an installation gives itself away: the corner, the seam and the edge.

LOFT Aluminum U-Trim · Black — Panel Trim

U-Trim

Closes an exposed edge: where the paneling stops, or around a door or window opening.

  • Short2 x 135 cm $4.40per linear ft $39.00 per box · $14.44/linear m
  • Long2 x 270 cm $3.61per linear ft $64.00 per box · $11.85/linear m
View profile
LOFT Aluminum T-Profile · Black — Panel Trim

T-Profile

Caps the horizontal joint when you stack two panels to reach a taller wall. Without it, the seam shows.

  • Short2 x 135 cm $4.63per linear ft $41.00 per box · $15.19/linear m
  • Long2 x 270 cm $3.78per linear ft $67.00 per box · $12.41/linear m
View profile
LOFT Aluminum Outside Corner · Black — Panel Trim

Outside Corner

Wraps an external corner. The panel runs to the edge and the profile caps the cut on both faces.

  • Short2 x 135 cm $4.97per linear ft $44.00 per box · $16.30/linear m
  • Long2 x 270 cm $4.06per linear ft $72.00 per box · $13.33/linear m
View profile

The Long format works out roughly 20% cheaper per linear foot than the Short. Worth it whenever the wall allows it.

For TERRA panels

Solid wood profiles

Chosen by tone: each profile carries the name of the panel it sits beside, so the finish reads as part of the wall instead of a border around it.

Every wood profile ships as 2 pieces of 48 in (96 in / 244 cm total) and installs peel & stick, like the panel.

Which one do I need?

I reached a corner
Corner profile — outside or inside, depending which way the wall turns.
My wall is taller than one panel
T-Profile, to cap the joint between the two stacked panels.
The paneling stops mid-wall
U-Trim on LOFT, Edge Trim on TERRA — both close the exposed edge.